How to Choose a Power Bank: Capacity, Charging Speed, Ports and Airline Rules

A power bank label tells you less than it seems. This guide shows how to turn milliamp-hours into usable energy, match output to your phone or laptop, and stay inside the battery rules that airlines tightened in 2025 and 2026.

The Review NYU is not affiliated with New York University.

We do not currently earn a commission from any link on this page. If links ever become affiliate links, we will label them clearly.

Short answer. Compare power banks by watt-hours (Wh), not milliamp-hours: Wh = mAh × cell voltage ÷ 1,000, and most cells are rated at 3.7 V, so a 20,000 mAh bank stores about 74 Wh. Expect to get noticeably less than that into your device, because conversion losses take a share; Anker's own worked example puts a 20,000 mAh bank at roughly 2.8 phone charges. Match the output to your device: recent iPhones fast charge from 20 W to 40 W or more over USB Power Delivery, while laptops need far more. For flying in the US, keep the bank in your carry-on, stay at or under 100 Wh unless your airline approves a 101–160 Wh unit, and check your airline's in-flight use rules, which several carriers tightened in 2025 and 2026.

How we judged

This is a research-based guide, not a hands-on test: The Review NYU did not charge, drain or measure any power bank. Sources include the FAA PackSafe spare-battery poster, the TSA's What Can I Bring entry for power banks, the USB Implementers Forum (USB-IF) page on USB Power Delivery, a Wireless Power Consortium Qi2 25W news release, Apple's fast-charging support page and CPSC recall notices.

For the gap between rated and usable capacity we used an explainer from Anker, which sells power banks, so treat its efficiency figures as a maker's estimate. Airline changes come from news reports, not airline pages. We recommend no products and quote no prices.

Capacity: why watt-hours matter more than milliamp-hours

Most power banks advertise capacity in milliamp-hours (mAh). That number describes electric charge at the battery cell's own voltage, not the energy you can move into a phone. Anker's explainer puts it plainly: the true measure of energy is watt-hours (Wh), and you get it with this formula:

Wh = mAh ÷ 1,000 × cell nominal voltage

Anker says most lithium-ion power banks use cells with a nominal voltage of 3.7 V. Check the label for the exact cell voltage. Watt-hours are also the unit airlines use.

A worked example: 20,000 mAh to Wh

  1. Convert to Wh. 20,000 mAh ÷ 1,000 × 3.7 V = 74 Wh stored at the cell level (Anker's figure).
  2. Subtract the power bank's own losses. Boosting 3.7 V up to 5 V or more costs energy. Anker estimates the bank's circuit runs at about 80–85% efficiency and uses 82% in its example: 74 Wh × 0.82 = about 60.7 Wh available at the port.
  3. Subtract the device's charging losses. Anker says the phone or laptop loses another 10–20% in its own charging circuits (it cites about 15% as typical): 60.7 Wh × 0.85 = about 51.6 Wh actually stored in your device.
  4. Divide by your device's battery size. Anker's example uses a smartphone battery of about 18 Wh and lands at about 2.8 full charges, and a 100 Wh laptop battery at about 0.5 charges.

So a "20,000 mAh" bank does not hold seven or eight phone charges, as a naive mAh comparison suggests. If a bank also lists a lower "rated capacity" at 5 V, that number is closer to what you will see.

What that means for common sizes

Applying the same Anker assumptions (3.7 V, 82% bank efficiency, 85% device efficiency, an 18.2 Wh phone battery) gives these rough figures. They are our arithmetic, not measurements.

Label capacityStored energy (3.7 V)Rough energy reaching the deviceApproximate phone charges (18.2 Wh battery)
10,000 mAh37 Whabout 26 Whabout 1.4
20,000 mAh74 Whabout 52 Whabout 2.8 (Anker's figure)
26,800 mAhabout 99 Whabout 69 Whabout 3.8

The last row matters for travel: at 3.7 V, a bank around 27,000 mAh is about as large as you can go while staying under the 100 Wh line covered in the airline section below.

Match the power bank to your devices

Capacity tells you how many charges you get; output wattage tells you how fast, and whether a laptop will charge at all. Check two numbers for the device you most need to keep alive: its battery size in Wh and the charger wattage its maker recommends. Our guide to reading a product spec sheet shows where these usually hide.

DeviceWattage to look forCapacity starting pointSource or basis
iPhone 15 or later (wired fast charge)18 W or more USB-PD port10,000 mAh for about one extra day; 20,000 mAh for a tripApple; capacity from the worked example above
iPhone 17e and iPhone Air20 W or more (Apple: up to 50% in about 30 minutes)10,000–20,000 mAhApple
iPhone 17, 17 Pro and 17 Pro Max40 W or more (Apple: up to 50% in about 20 minutes)10,000–20,000 mAhApple
Phone charged wirelessly on a magnetic padQi2 (15 W) or Qi2 25W certificationSize up, because wireless adds its own lossesWPC
USB-C laptopMatch the wattage printed on the laptop's own charger; USB-PD supports up to 100 W on standard cables and up to 240 W with the newer specNear the 100 Wh flight limit; even then, Anker estimates about half a charge of a 100 Wh laptop battery from a 20,000 mAh bankUSB-IF; Anker

A bank that delivers only a fraction of your laptop charger's wattage may just slow the drain while you work. For phones, Apple frames fast charging as reaching 50% in 20 to 30 minutes, so a very high-wattage bank mainly pays off if you also carry a laptop. For wearables, see our guide to choosing a smartwatch.

Charging speed: USB Power Delivery and wireless standards

USB Power Delivery (USB-PD)

Power Delivery is the USB-IF standard that lets a charger and a device agree on a higher voltage and current over USB-C. According to the USB-IF, USB PD was limited to 100 W (20 V over cables rated at 5 A) until Revision 3.1, announced in 2021, which raised the ceiling to 240 W. The new 28 V, 36 V and 48 V levels allow 140 W, 180 W and 240 W respectively, and an adjustable voltage mode lets a device request voltages in between. That adjustable mode is the "Adjustable Voltage Supply (AVS)" Apple names for its fastest iPhone 18 Pro charging on its support page.

  • Look for "USB-C PD" and a watt figure for each port, not only a combined total.
  • Use a cable rated for the wattage; the USB-IF says 240 W needs a full-featured USB Type-C cable built to the updated spec.
  • Proprietary fast-charge modes may not work across brands; USB-PD is the common ground.

Qi2 and magnetic wireless banks

Magnetic banks that snap to the back of a phone trade some efficiency for convenience. The Wireless Power Consortium says Qi2 launched in November 2023 at 15 W, and that Qi2 25W (Qi v2.2.1), announced on 23 July 2025, delivers nearly 70% more power. If you want a wireless bank, look for "Qi2" or "Qi2 25W" certification rather than vague "magnetic" or "MagSafe-compatible" wording, and check that your phone supports the higher tier. Expect fewer charges per Wh than over a cable.

Ports, pass-through and recharge time

Port layout decides whether a bank fits the way you travel. On the spec sheet, check:

  • Port types. USB-C for modern phones and laptops; USB-A only if you still carry older cables.
  • Per-port and shared output. A high total wattage is often split when two devices charge at once.
  • Input wattage. A large bank with a slow input can take a long time to refill overnight.
  • Pass-through charging, if you want to charge a device while the bank charges. Confirm the maker lists it.
  • A charge display, which helps you avoid running dry.

Weight scales with capacity, so think about which reachable pocket it will live in; see our guides to commuter backpacks and carry-on suitcases.

Airline rules for power banks in 2026

These rules change; check your airline before every trip. This is what the sources said on 20 November 2026.

US baseline: FAA and TSA

The TSA's power bank entry (last updated 14 May 2025) says portable chargers and power banks containing a lithium-ion battery must go in carry-on bags and are prohibited in checked luggage. The FAA's PackSafe poster sets the size bands, and the TSA's page on batteries over 100 Wh adds the per-person limit.

Battery sizeCarry-onChecked bagConditions
Up to 100 WhAllowedNot allowedCovers most power banks (FAA)
101–160 WhPossibleNot allowedMaximum of two spares per person, with airline approval (FAA, TSA)
Over 160 WhNot allowedNot allowedForbidden for passengers (FAA)

The FAA poster also warns that airlines may set stricter quantity and Wh limits, and the TSA notes that the officer at the checkpoint makes the final decision.

Changes in 2025 and 2026

  • Southwest Airlines began requiring passengers to keep battery packs and portable chargers visible while using them in flight, so crew can respond faster if one overheats, NPR reported on 30 May 2025. The same report cited FAA data of 22 verified battery incidents (fire, smoke or overheating) on flights in the first months of 2025. We did not verify the policy on Southwest's own site.
  • International flights. AirlineRatings reported on 30 March 2026 that new International Civil Aviation Organization (ICAO) rules, effective 27 March 2026, limit passengers on international flights to two power banks in the cabin and ban charging them on board, and that power banks should not be stowed in overhead bins. It named Emirates, Lufthansa, British Airways and others as aligned. We could not read the ICAO text directly, and the report is not precise about whether "charging" covers using a bank to charge a phone, so check your airline's own wording.

In practice: buy at or below 100 Wh if you fly, carry no more than two banks, and keep the one in use where you and the crew can see it.

Safety and recalls

Well-known brands can ship faulty cells too. In June 2025 the CPSC announced a recall of about 1,158,000 Anker PowerCore 10000 power banks (model A1263) because the battery could overheat; the company had received 19 reports of fires and explosions. The CPSC search results we reviewed also listed 2025 and 2026 power bank recalls from other brands, including Belkin and Casely; we read the titles of those notices but not their full details.

  • Check the model and serial number of any bank you already own against CPSC recalls and the maker's recall page.
  • Stop using a bank that swells, gets unusually hot or smells. The CPSC notice says recalled lithium-ion batteries should not go in the trash, curbside recycling or store battery drop boxes; call your local household hazardous waste center first.

Buying checklist

  1. Find the Wh rating. If only mAh is shown, multiply by the cell voltage and divide by 1,000. Stay at or under 100 Wh if you fly.
  2. Estimate real charges. Multiply Wh by roughly 0.7 (Anker's 82% and 85% efficiencies combined) and divide by your device's battery Wh.
  3. Match the output. Your phone's fast-charge wattage at minimum; your laptop charger's wattage if you need to run a laptop.
  4. Check USB-C PD per port, and what happens to output when two devices are plugged in.
  5. For wireless, look for Qi2 or Qi2 25W certification, not just "magnetic."
  6. Check input wattage so the bank refills overnight.
  7. Look for a printed Wh label on the bank itself for airport screening.
  8. Check recalls on the CPSC site before buying used or discounted stock.
  9. Test it during the return window with your real devices; see how to test a product during the return window.

Bottom line

Choose by watt-hours, not milliamp-hours, and expect only about 70% of the stored energy to reach your device, by Anker's estimate. For phones, 10,000 to 20,000 mAh with a USB-C PD port that meets your phone's fast-charge wattage covers most needs. For laptops, match the laptop charger's wattage and accept that even a bank near the 100 Wh flight limit may give only about half a charge. If you fly, keep it in your carry-on, keep it under 100 Wh, carry no more than two, and read your airline's current rules before you leave, because they changed more than once in 2025 and 2026.

Limits of this article

  • We did not test any power bank; the per-size charge estimates are our arithmetic using Anker's efficiency assumptions.
  • Anker sells power banks, so its efficiency ranges are a maker's estimate. Its example lists an 18.2 Wh phone battery but divides by 18.5 Wh.
  • The FAA's main PackSafe page blocked our reader, so we used the FAA's PackSafe poster PDF and TSA pages for the Wh limits.
  • The Southwest and ICAO changes come from news reports (NPR, AirlineRatings), not the airline's or ICAO's own documents.
  • We give no laptop wattage figures because we did not check laptop makers' pages; read your own charger.
  • No images, because we have no licensed photos.

Sources

Frequently asked questions

How do I convert mAh to Wh for a power bank?

Divide the mAh figure by 1,000 and multiply by the cell voltage, usually 3.7 V. A 20,000 mAh bank at 3.7 V stores about 74 Wh.

Why does my power bank give fewer charges than its capacity suggests?

Energy is lost when the bank boosts its cell voltage and again inside your phone's charging circuit. Anker estimates the bank runs at about 80 to 85 percent efficiency and the device loses about 15 percent, so a 20,000 mAh bank gives roughly 2.8 phone charges in its example.

Can I take a power bank on a plane?

In the US, yes, in your carry-on only; the TSA prohibits power banks in checked bags. Banks up to 100 Wh are allowed, 101 to 160 Wh need airline approval with a maximum of two, and anything over 160 Wh is forbidden.

Can I use a power bank during a flight?

It depends on the airline. Southwest requires power banks to be visible while in use, according to NPR, and AirlineRatings reports that ICAO rules effective 27 March 2026 limit international passengers to two power banks and ban charging them on board, so check your carrier's current rules.

What wattage do I need to fast charge an iPhone?

Apple says iPhone 15 and later fast charge with an 18 W or higher USB-PD source, iPhone 17e and iPhone Air with 20 W or more, and iPhone 17 and 17 Pro models with 40 W or more.