The warmest-looking jacket on the rack is not always the right one: what keeps you comfortable depends on whether your winter is cold and dry, cold and wet, or mostly a walk to the subway.
The Review NYU is not affiliated with New York University.
We do not currently earn a commission from any link on this page. If links ever become affiliate links, we will label them clearly.
Short answer. Start with your climate, not the price tag. For cold, dry weather, down gives the most warmth for its weight; for wet, slushy or sweaty conditions, synthetic or hybrid insulation keeps working when damp. If rain or wet snow is common, you also need a waterproof shell with taped seams, and around 10,000mm is a common recommendation for everyday and resort use. Finally, buy a fit that leaves room for a sweater underneath, covers your wrists when you reach forward, and has a hood that moves with your head.
This is a research-based guide, not a hands-on test: The Review NYU did not wear, wash or lab-test any jackets for it. On 16 November 2026 we read retailer buying guides from REI Co-op (insulation, fill power, down vs synthetic), Snow+Rock and evo (waterproof and breathability ratings), the Textile Exchange page on the Responsible Down Standard, and legal summaries plus the bill text of California's PFAS-in-textiles law. Those pages were read as search-result excerpts, not always as full pages, so we have kept to points the excerpts state clearly.
Retailers sell the jackets they write about, so we treat their rating ranges as rules of thumb. We could not read a fill-power test standard (such as the IDFL method). Fit and care advice is general guidance.
Jackets fail by being too thin or by getting wet, from rain outside or sweat inside. Which risk you face depends on your winter.
REI Co-op's guide to insulated jackets suggests thinking in three layers: a base layer to move moisture off your skin, a mid layer to insulate, and an outer layer to protect you from the weather. It adds that an insulated jacket can be the mid layer, the outer layer or both, and that you should consider how hot or cold you run and how active you will be (REI Co-op).
Down is the fluffy under-plumage of ducks and geese. According to REI Co-op, it traps heat in small air spaces within its plumules, and it is warm, light and compressible. The trade-offs REI lists are just as important: down does not insulate when wet, takes a long time to dry, and costs more than synthetic. REI recommends it for cold, dry environments and for activities where low weight matters, such as backpacking or travel. REI's down vs synthetic explainer adds that down is long-lasting.
Synthetic insulation uses polyester fibers to imitate down's loft. REI's staff picks guide says a synthetic jacket may be right if you will be outdoors somewhere wet or doing something sweaty, like running, while down is usually warmer, more compressible and a bit lighter (REI Co-op).
Hybrids put down where warmth matters most and synthetic fill where moisture collects. REI suggests water-resistant down, synthetics or hybrids if you expect rain, snow, humidity or sweat. Placement varies by brand, so read the description.
Fill power is the number printed on almost every down jacket. REI Co-op defines it as the volume in cubic inches that one ounce of the down fills. Higher fill power means loftier down, so the jacket compresses more easily and gets the same warmth from less weight. REI's buying advice describes the usual range as roughly 450 to 900 (REI Co-op), and its down vs synthetic explainer says premium goose down can reach 900 fill power or higher, while duck down tops out around 750 or 800 (REI Co-op).
Fill weight is how much down is in the jacket, in grams or ounces. REI calls it an important spec that you rarely find. More fill weight means more warmth but less compressibility (REI Co-op).
The two numbers work together, and fill power alone can mislead you. REI's fill power explainer gives a clear example: a 900-fill jacket with only 30 g of down will not be warmer than a 450-fill jacket with 100 g of down. For a city winter, more mid-range down can match a premium jacket.
If fill weight is not listed, compare visible loft and the brand's warmth guidance, and treat fill power as a measure of quality and packability, not total warmth. Our guide on how to read a product spec sheet covers this habit in general.
If animal welfare matters to you, look for the Responsible Down Standard (RDS). According to Textile Exchange, which runs the standard, the RDS aims to improve the welfare of ducks and geese used for down, prohibits removing down or feathers from live birds (including so-called molt harvesting), and prohibits force-feeding. A brand's own sourcing claim is not a certification, so look for the standard by name.
The outer fabric decides whether rain and wet snow reach the insulation. Retail guides draw a three-way distinction. Snow+Rock describes waterproof jackets as preventing water penetration, water-resistant jackets as handling light rain but not prolonged exposure, and water-repellent jackets as having a surface treatment that makes water bead up but may not hold out heavy rain.
A waterproof rating shows how much water pressure the fabric withstands before leaking. It is measured in millimeters and also called hydrostatic head: a 10,000mm fabric holds back the pressure of a 10-meter column of water (Snow+Rock). evo notes that brands test in-house or at independent labs under different protocols, and some quote PSI instead (704 mm = 1 PSI). Snow+Rock adds that the number describes the fabric in the lab, not the finished jacket: seams, zips, hood and cuffs all affect real performance.
Rough guide ranges from the two retailers:
Stitching punches holes in a membrane, so a waterproof jacket needs fully taped seams, a point both Snow+Rock's checklist and its FAQ make. evo explains that waterproof-breathable fabrics pair a nylon or polyester face fabric with a laminated membrane or coating, and that 3-layer (3L) fabrics add a bonded inner scrim for comfort. Snow+Rock lists durable 3-layer construction among the things to look for in mountaineering jackets.
Breathability is usually given as a moisture vapor transmission rate: grams of water vapor that pass through a square meter of fabric in 24 hours, so higher is more breathable (Snow+Rock). Brands use different test methods, so compare numbers within a brand rather than across brands. evo suggests 10,000 to 15,000 g for activities where you often break a sweat. It also notes a very breathable shell can cost you heat in cold, dry weather. For a city commute, a two-way zip often matters more.
Our synthesis of REI Co-op insulation advice and Snow+Rock and evo rating ranges, not a lab result.
| Climate or use | Insulation | Shell | Watch for |
|---|---|---|---|
| Cold and dry (clear, below freezing) | Down, with more fill weight for colder places | Water-resistant is usually enough | Wind; a snug hood and hem stop drafts |
| Cold and wet (sleet, slush, freezing rain) | Synthetic or hybrid, or water-resistant down under a shell | Waterproof, fully taped seams; 10,000mm or more for long exposure | Hood that keeps rain off your face; cuffs that seal |
| City commute (short walks, heated transit) | Moderate down or synthetic; avoid overkill warmth | Water-resistant, or waterproof around 5,000 to 10,000mm if rain is common | Two-way zip to vent; length that covers your hips when seated |
| Active winter use (hiking, skiing) | Synthetic or hybrid mid layer | Waterproof-breathable shell, often 10,000mm or more with high breathability | Pit zips; room for layers; helmet-compatible hood if you ski |
If your winter swings between these, a layering system (shell plus separate puffer) is more flexible than one heavy parka.
Too tight and you compress the insulation; too loose and cold air pumps in as you move. Try jackets on over the layers you will really wear.
Sizing differs by brand and by cut, so buy where returns are easy and check fit early. Our guide to testing a product during the return window applies here: wear it indoors with tags on before deciding.
Very high fill power on a jacket you will never pack, or a 20,000mm-plus shell for a city commute. If you are shopping a sale, our guide to telling whether a sale is a real deal helps you check the discount.
Most shells carry a DWR (durable water repellent) finish that makes water bead off. Historically many DWRs used PFAS, a class of persistent fluorinated chemicals. California's law AB 1817 bans regulated PFAS in most textiles from 1 January 2025; according to a Morgan Lewis legal summary, outdoor apparel for severe wet conditions has until 1 January 2028, and in the meantime such products containing PFAS must carry a "Made with PFAS chemicals" disclosure. The bill text defines that category narrowly, as extreme-use gear for outdoor sports experts not marketed for general consumer use. Morgan Lewis also covers a similar New York ban. If this matters to you, look for an explicit PFAS-free label.
Dirt, sweat and wear reduce waterproof performance over time (Snow+Rock). Wash shells and puffers according to the care label, usually with a technical or down-specific wash rather than regular detergent and fabric softener, and dry down thoroughly on low heat so it regains loft. When water stops beading on a shell, cleaning it and reapplying a wash-in or spray-on repellent can restore it.
No. Fill power measures the quality and loft of the down, while fill weight measures how much is in the jacket. REI Co-op notes that a 900-fill jacket with 30 g of down is not warmer than a 450-fill jacket with 100 g.
Synthetic or a down/synthetic hybrid is usually the safer choice, because down stops insulating when wet and dries slowly. Water-resistant down under a waterproof shell is another option.
Retailer guides suggest around 5,000 to 10,000mm is enough for commuting and light to moderate rain. Fully taped seams and a good hood matter as much as the number.
It is a Textile Exchange certification that prohibits live plucking and force-feeding of the ducks and geese used for down and tracks the down through the supply chain.
Fewer do. California and New York began banning PFAS in most apparel in 2025, with a later 2028 deadline for specialist severe-wet-weather gear. Look for an explicit PFAS-free label if it matters to you.