Most cookware sets sell you a piece count. This guide compares the four everyday materials on heat, care, induction and lifespan claims, using regulator, statute and manufacturer sources, then shows which pieces are worth buying.
The Review NYU is not affiliated with New York University.
We do not currently earn a commission from any link on this page. If links ever become affiliate links, we will label them clearly.
Short answer. For most kitchens, the best set is a small one: a clad stainless core (skillet, saucepan, large pot), one nonstick skillet for eggs and fish, and a cast iron or carbon steel pan for searing. Stainless and cast iron are long-lived; Made In, a cookware brand, says nonstick typically lasts two to four years. If you cook on induction, a magnet must stick firmly to the pan's base. Bare cast iron and carbon steel need hand washing, drying and a thin coat of oil, and Minnesota has banned the sale of cookware with intentionally added PFAS since January 1, 2025.
This is a research-based guide, not a hands-on test. The Review NYU did not cook in, scrub, weigh or heat any pan for this article. We read the U.S. Food and Drug Administration's page on PFAS in food contact applications, Minnesota's statute on products containing PFAS, induction guidance from appliance maker Whirlpool, care instructions from cast iron and carbon steel maker Lodge, and construction and care FAQs from cookware brand Made In.
Lodge and Made In sell the pans they describe, and Whirlpool sells induction cooktops, so we label their figures as company guidance, not universal standards. We name no products and quote no prices.
Most everyday cookware comes down to four surfaces. Each is good at something different, which is why many cooks end up with a mix.
| Material | Heat response | Everyday care | Dishwasher | Induction | Oven | Lifespan (claims) |
|---|---|---|---|---|---|---|
| Nonstick (coated) | Depends on the body underneath; best at medium heat (Made In) | Wood or silicone tools, preheat with fat, no cooking spray | Made In says never | Only with a magnetic base; check the listing | Varies by maker; Made In rates its own to 500°F | Made In says typically 2–4 years |
| Stainless steel (clad) | Even and responsive when fully clad with an aluminum core (Made In) | Preheat before adding fat; soap and sponge | Made In: technically yes, hand wash recommended | Usually yes; confirm with a magnet | Made In rates its own to 800°F | Made In says "designed to last a lifetime" |
| Cast iron (bare) | Slow to heat, holds heat well (general knowledge) | Wash, dry completely, thin coat of oil (Lodge) | No, per Lodge | Yes, per Whirlpool | Yes | Lodge says "cast to last for generations" |
| Carbon steel | Heats and cools faster than cast iron, per Lodge | Same wash, dry, oil routine; no soaking | No, per Lodge | Yes, per Lodge | Yes, per Lodge | No figure found; seasoning can be rebuilt |
"General knowledge" marks a common rule of thumb not stated in our sources. Lifespan figures are manufacturer claims.
Traditional nonstick coatings are fluoropolymers such as PTFE, part of the chemical family called PFAS; "ceramic" nonstick uses a non-fluorinated coating. Both suit eggs, pancakes and delicate fish.
The FDA says it has authorized certain PFAS for food contact uses since the 1960s, including nonstick coatings on pots and pans. In its description, the PFAS molecules in these coatings are polymerized and bonded to the pan at very high temperatures, and "studies show negligible amounts of PFAS in this coating can migrate to food." The FDA singles out paper packaging grease-proofers, not cookware, as the use that could raise a dietary concern. The page does not cover fumes from overheated pans or PFAS in the environment, the concern behind state laws.
Under Minnesota Statutes section 116.943 ("Amara's Law"), beginning January 1, 2025, a person may not sell, offer for sale or distribute for sale in Minnesota cookware that contains intentionally added PFAS. The definition covers pots, pans, baking sheets and utensils; resale of used products is exempt. We did not verify other states' rules.
Made In's nonstick FAQ, written about its own pans, says:
Made In also says nonstick typically lasts two to four years, depending on build quality and how hard it is used. That argues for one or two nonstick skillets rather than a whole coated set.
Stainless needs no seasoning, does not react with tomatoes or wine, and tolerates metal utensils and high heat. Because steel conducts heat poorly, good pans bond a conductive core, usually aluminum, between steel layers.
Made In explains that "clad" means the metal layers are bonded through the whole body of the pan, walls included. Cheaper cookware often uses what it calls a "sandwich bottom," a conductive disc attached only to the base, which Made In says leads to uneven heating. In listings, look for "fully clad," "tri-ply" or "5-ply" rather than an "encapsulated base." "Ply" is the number of bonded layers.
Made In rates its own stainless as oven-safe to 800°F and induction-compatible. Other brands' lids and handles may carry lower limits.
Bare cast iron is protected by "seasoning," oil baked onto the surface. It heats slowly but holds heat, which suits searing and stovetop-to-oven dishes. Because it contains iron, it works on induction; Whirlpool lists cast iron among induction-friendly materials.
Lodge's cleaning instructions are short: wash in warm, soapy water with a stiff brush or scrubbing pad, dry completely, then wipe on a thin layer of oil. Lodge says modern dish soap is fine and "no longer strong enough to remove seasoning." It also says not to soak cast iron and not to put it in the dishwasher, because the dishwasher "will remove the seasoning and likely cause rust."
If a pan rusts from soaking, air drying or a damp cupboard, Lodge's fix is to scour the rust off, wash and dry, oil the pan inside and out, and for heavier rust re-season it upside down in a 450–500°F oven for one hour, then let it cool in the oven. Unlike a worn coating, neglected cast iron can be restored.
Enameled cast iron (the colorful Dutch ovens) has a glass-like coating instead of seasoning. Lodge's care page says to hand wash it in warm, soapy water. It needs no oiling and suits acidic braises.
Carbon steel pans are formed from sheet steel rather than cast in molds. Lodge says that makes its carbon steel lighter and thinner than its cast iron, so it heats up and cools down faster. It is the traditional material for woks and crepe pans.
The care routine is the same as cast iron. Lodge's three words are "wash, dry, oil": hand wash in warm, soapy water, dry completely, add a very thin layer of oil. Do not soak it, which "will likely cause rust," and do not put it in the dishwasher. Lodge says carbon steel works on any heat source, including induction, the oven and the grill.
One trade-off: carbon steel is reactive. Made In notes that acidic ingredients can strip its seasoning, so long tomato sauces belong in stainless or enamel.
Induction heats the pan through a magnetic field, so the base must be magnetic. Whirlpool's guidance is a fridge-magnet test: hold a magnet to the bottom of the pan, and if it "sticks firmly," the pan is compatible. If it slides off or does not stick, it will not work.
Lids usually count as pieces, so a "10-piece" set may be five pans and five lids, often including sizes you rarely use.
An all-nonstick set is the weakest value: if Made In's two-to-four-year estimate holds, every coated piece wears out together, including pots that never needed a coating.
For most households cooking for one to four people, five or six pieces cover nearly everything. These sizes are common starting points, not rules; adjust for how many people you feed.
Start with your stove and the five or six dishes you cook most, not with a piece count. For most kitchens, a small clad stainless set or a few stainless pieces form the core, one nonstick skillet handles eggs and fish and gets replaced when it wears out, and a cast iron or carbon steel pan covers hard searing for very little money. If you have induction, run the magnet test before you buy anything. If you prefer to avoid PFAS coatings, a seasoned carbon steel or cast iron pan does most of what nonstick does, at the cost of a minute of drying and oiling after each wash.
A set is worth it when you are starting from scratch and its pieces match what you cook, usually in clad stainless. If you already own some pans or want mixed materials, buying individual pieces is often better value.
Clad stainless steel is the most versatile everyday material because it needs no seasoning, handles acidic food and high heat, and works on most stoves. Pair it with one nonstick skillet for eggs.
The FDA says studies show negligible amounts of PFAS migrate into food from nonstick pan coatings. Follow the maker's heat and care limits, and note that Minnesota bans the sale of cookware with intentionally added PFAS.
Hold a magnet to the bottom of the pan. Whirlpool says that if it sticks firmly the pan is compatible, and if it slides off or does not stick it will not work.
No. Lodge says the dishwasher will remove the seasoning and likely cause rust. Wash by hand with warm soapy water, dry completely and wipe on a thin layer of oil.
Made In, a cookware brand, says nonstick typically lasts two to four years, depending on build quality and use. Stainless and cast iron can last far longer with basic care.