How to Choose Hiking Boots: Fit, Support, Waterproofing and When Trail Shoes Are Enough

Start with the hikes you actually do, then get the fit right; the rest of the features follow from those two decisions.

The Review NYU is not affiliated with New York University.

We do not currently earn a commission from any link on this page. If links ever become affiliate links, we will label them clearly.

Short answer. Choose hiking footwear by terrain, distance and pack weight, then prioritise fit over features. REI says boots should be snug everywhere but tight nowhere, with about a thumb's width of space in front of your longest toe. Stiffer, higher boots make most sense for heavy loads and rugged ground; the research on tall collars preventing sprains is mixed. Waterproof membranes keep out rain and puddles but breathe less and dry slowly. For day hikes on maintained trails with a light pack, a hiking shoe or trail runner is often enough.

How we judged

This is a research-based guide, not a hands-on test. The Review NYU did not test any boots or shoes for this article. On 17 November 2026 we read two REI Co-op Expert Advice articles in full: How to Choose Hiking Boots and Hiking Shoes (updated 18 May 2026) and Hiking Boots vs. Hiking Shoes. To check the most argued-over claim, that taller boots protect your ankles, we also read search excerpts from a peer-reviewed study on high-top and low-top shoes hosted by the US National Library of Medicine, and a MUSC Health article summarising the same research.

REI sells the footwear it writes about, so we treat its advice as experienced retail guidance rather than independent evidence. Where a number appears below, it is linked to where it came from. Where the sources disagree or the evidence is thin, we say so.

The main types of hiking footwear

REI sorts hiking footwear by three questions: how long or far you go, how rough the terrain is, and how much you carry. Here is how the common types line up, in rough order from lightest to heaviest.

Trail-running shoes

Lighter and more flexible than hiking shoes, built for faster movement and quick changes of direction. REI says they suit light to moderate terrain, and that fastpackers and thru-hikers often prefer them to heavier boots. The trade-off is lifespan: REI says they typically last about 500 miles before needing replacement.

Hiking shoes

Low-cut shoes with tougher uppers and moderately flexible midsoles. REI describes them as a balance between running shoes and boots, and says low-cut, flexible models can replace boots entirely for some day hikers. They usually need no break-in.

Mid- and high-cut day hiking boots

REI describes these as intended for day hikes or short backpacking trips with light loads. They flex easily and need little break-in, but lack the support and durability of full backpacking boots. Best for light or moderate terrain.

Backpacking boots

Built for heavier loads on multiday trips. Most are high-cut, with stiffer midsoles than lighter footwear, and REI rates them for moderate to rugged terrain, on or off trail. They are heavier, less breathable and need breaking in.

Mountaineering boots

Considerably stiffer and often taller, for snowy peaks and rough ground. REI notes they use three-quarter or full-length shanks, and that crampon compatibility matters: a crampon strapped to a flexible-soled boot will not fit as securely as on a rigid one. Most hikers do not need these.

Comparison table: which type fits which hike

This table condenses the guidance in REI's boot guide and boots vs shoes article. The pack volumes and mileage figures are REI's; treat them as rules of thumb, not limits.

TypeBest for (per REI)Typical loadBreak-inMain trade-off
Trail-running shoeFaster hikes, light to moderate terrainLight day packNoneLess underfoot protection; about 500 miles of life
Hiking shoeDay hikes, groomed or moderate trailsLight day packNoneLess ankle coverage; not built for heavy packs
Day hiking boot (mid/high)Short trails to several hours, light to moderate terrainPacks under 35 litersSomeHeavier and less breathable than shoes
Backpacking bootMultiday trips, moderate to rugged terrainUp to about 70 to 75 litersYesHeavy; too stiff for many day hikes
Mountaineering bootSnow, ice, big elevation gain75 to 100 litersYesExpensive, heavy, specialised

Fit: the part that matters most

REI's summary of good fit is that hiking footwear should be snug everywhere but tight nowhere, with room to wiggle your toes. A well-chosen boot type that fits badly will still give you blisters. The practical checks:

  • Shop late in the day. Feet swell during the day, so trying boots on in the afternoon or evening helps you avoid a pair that feels too small halfway through a hike.
  • Bring your hiking socks (and orthotics, if you use them). Sock thickness changes fit. REI also recommends synthetic over cotton socks on the trail, because cotton dries slowly and is more likely to cause blisters.
  • Check length with the insole. Pull the insole out and stand on it: REI says you should have a thumb’s width of space between your longest toe and the end.
  • Watch your heel. Pay attention to how your heel sits in the heel cup when you walk. If it slips noticeably, try a different lacing pattern or a different model. Our sources do not give a specific acceptable amount of heel lift, so use comfort and the absence of rubbing as your guide.
  • Do a downhill test. Walk down an incline or a store test ramp. If your toes hit the front of the boot, REI says that is a fit problem worth raising with a specialist.
  • Check volume. If you lace the boot firmly and still feel space over the top of your foot, REI says the boot's volume is wrong for you.

Check the return policy before buying; our guide on testing a product during the return window covers how to do that without voiding it.

Breaking boots in

REI says flexible hiking shoes and trail runners do not need a break-in period, but most sturdier hiking, backpacking and mountaineering boots do. Wear them on walks and short hikes before a long trip. Full-grain and nubuck leather in particular need ample break-in time, according to the same guide.

Support: ankle height versus a stiff sole

Support means two things: how high the boot comes up your ankle, and how stiff the sole is.

Sole stiffness and load

The midsole largely determines stiffness, and REI argues that stiffer footwear can mean more comfort and stability on long, rocky hikes. Some boots add a 3 to 5 millimeter thick shank between midsole and outsole for load-bearing stiffness; some trail shoes use a rock plate instead, which resists twisting and stops sharp rocks from bruising your feet.

The heavier your pack, the more sole stiffness helps. That is the main case REI makes for backpacking boots: their higher cuts and stiffer midsoles add stability when you carry a heavy load.

Does a high collar prevent sprains?

This is where the evidence is weaker than the marketing. REI says mid- and high-cut boots offer ankle support when worn correctly, but also notes that for some people a tall collar feels restrictive, and that the stiffness and height of a boot can reduce movement and responsiveness.

The research we found is mixed and mostly not about hiking. A lab study of landings on a tilted surface reported no significant difference in maximum ankle inversion between high-top and low-top shoes, and its literature review notes that epidemiological studies, largely in basketball, found no clear difference in sprain rates between high-tops and low-tops, even though some lab studies found that high-tops reduced inversion. MUSC Health reached a similar summary. Our reading: a high collar may help some people, especially with a heavy pack or a history of sprains, but it is not a guarantee. Fit, sole stiffness and watching your footing matter at least as much.

Waterproofing: when it helps and when it hurts

Boots sold as waterproof use a waterproof/breathable membrane, such as GORE-TEX or eVent, inside the upper. REI notes the downside plainly: a membrane breathes less than the open mesh on many non-waterproof shoes, which can make your feet sweat on summer days.

The bigger issue is drying. According to REI, hiking boots resist water but take much longer to dry once they do get wet, while breathable hiking shoes dry quickly.

A practical way to decide:

  • Pick waterproof for cold, wet or snowy hikes, shallow puddles and wet grass, and anywhere cold feet are a real risk.
  • Consider non-waterproof for hot, dry trails, or routes with frequent deep crossings where your feet will get wet anyway and fast drying matters more.
  • Remember sweat counts. REI warns that sweaty feet eventually become cold feet, and moisture raises blister risk, so wear moisture-wicking socks either way.

Outsoles, lugs and weight

The outsole is the rubber that meets the ground. REI explains the basic trade-off: harder rubber lasts longer but can feel slick off trail, while softer rubber grips and cushions better but wears faster. A pronounced heel brake helps on steep descents.

Lugs, the bumps on the sole, should match your terrain. REI's guidance:

Terrain or conditionsLug pattern REI recommends
Dry, groomed, mostly flat trailModerately deep, not widely spaced
Mud, elevation gainDeep and widely spaced, to shed mud
Rocky, uneven groundDeep and multidirectional
Snow or iceDeep and aggressive
Wet, smooth rockShallower and tightly spaced, for more contact area

Weight is the other big lever. REI says a light hiking shoe can weigh as little as 1 pound and a sturdy boot more than 3 pounds, and repeats the backpacker saying that a pound on your feet equals five on your back. Only carry boot weight when the support or protection is worth it.

When trail shoes are enough

For many hikers, a hiking shoe or trail runner is all they need. REI says lighter shoes may be the better option if you carry a light pack, stay close to home, or walk groomed or paved trails, and that they are easier to break in and often better for balance.

Trail shoes are usually enough when most of these are true:

  • You are day hiking with a light pack.
  • The trail is maintained, with moderate rocks and roots rather than loose scree or off-trail travel.
  • The weather is warm or mild, and you do not expect snow.
  • You have no recent ankle injury and feel steady on uneven ground.
  • You value speed, breathability and quick drying over durability.

Boots earn their weight when you carry a heavy multiday load, hike rugged or off-trail terrain, travel in cold, wet or snowy conditions, or need crampons.

If you already run on trails, our running shoe guide covers cushioning and drop in more detail.

Step by step: choosing your hiking footwear

  1. Define your typical hike. Write down your usual distance, terrain (groomed, moderate or rugged), season and how much you carry. Plan for the hikes you actually do most, not the rare big trip.
  2. Pick a footwear type. Use the comparison table: trail runners or hiking shoes for light loads on maintained trails, day hiking boots for packs under about 35 liters on mixed ground, backpacking boots for heavy multiday loads, and mountaineering boots only for snow and ice.
  3. Decide on waterproofing. Choose a membrane for cold, wet or snowy conditions. Choose a breathable, non-waterproof shoe for hot, dry trails or frequent deep crossings where quick drying matters more.
  4. Match the outsole to your terrain. Look for deep, widely spaced lugs for mud, multidirectional lugs for rock, and a heel brake if you hike steep descents.
  5. Get measured and shop late in the day. Have your foot length, width and arch measured if you can, and try boots on in the afternoon or evening while wearing your hiking socks and any orthotics.
  6. Run the fit checks. Check for a thumb's width in front of your longest toe on the insole, a heel that stays put, no pressure points, no extra volume over the top of the foot, and no toe contact on a downhill ramp.
  7. Break them in before a big trip. Wear sturdier boots on walks and short hikes first. Return or exchange them within the retailer's window if hotspots do not settle.

Limits of this article

  • This is a research-based guide. The Review NYU did not test any boots or shoes.
  • Most of the practical guidance comes from REI Co-op, a retailer that sells the footwear it describes. We could not reach a second independent outfitter guide within our research budget for this article.
  • The ankle-support research (PMC study and MUSC Health) was read only as search excerpts, not full text, and largely concerns basketball shoes and lab landings, not hiking.
  • REI also cites a claim that extra foot weight can take up to 6.5 times the energy to maintain pace; we did not verify the underlying studies and left the figure out.
  • Pack-volume ranges, the roughly 500-mile lifespan for trail shoes and weight figures are REI's general estimates and vary by model and user.
  • None of our sources gives a specific acceptable amount of heel lift, so we describe that check qualitatively.
  • No prices or specific models are recommended in this guide.

Sources

Frequently asked questions

How much room should hiking boots have at the toe?

REI suggests pulling out the insole and standing on it: there should be about a thumb's width between your longest toe and the end. On a downhill slope your toes should not hit the front of the boot.

Do high-cut hiking boots prevent sprained ankles?

Not reliably. Some lab studies found high-tops reduce ankle inversion, but other studies and injury data, mostly from basketball, found no clear difference in sprain rates. A stiff sole, good fit and careful footing matter as well.

Are waterproof hiking boots always better?

No. Membranes keep out rain and puddles but breathe less, so feet can sweat in warm weather, and wet boots dry slowly. Non-waterproof shoes are often better on hot, dry trails or routes with deep crossings.

Can I hike in trail-running shoes?

Yes, for many day hikes on maintained trails with a light pack. REI notes that fastpackers and thru-hikers often prefer them, though they offer less underfoot protection and typically last about 500 miles.

Do I need to break in new hiking boots?

Flexible hiking shoes and trail runners generally do not need it. Sturdier boots, especially leather ones, should be worn on walks and short hikes before a long trip.

When should I try on hiking boots?

Late in the day, when your feet have swollen to their largest, and while wearing the socks and any orthotics you plan to hike in.